advanTex 850

Circular loom

The circular loom advanTex 850 is conceived for the production of tubular fabric out of PP or HDPE film tapes with six weaving shuttles.

Technical data:

  • Weft insertion rate: up to 1.000 picks/min
  • Working range: 300-850 mm DF (double flat)
    700-850 mm DF at reduced speed
  • Number of warp ends: 576/720
  • Weft density range: 20-75/10cm
  • Tape characteristics: Tenacity min. 5,5 g/den
    Elongation at break 25 - 30%
    Regularity width +- 0,05mm/ Thickness +-5%
  • Bobbin characteristics: Diameter warp max. 180mm / Weft max. 115mm
    Traverse length 200mm
  • Fabric winder: Diameter max. 1.200mm
    Core dimensions ID 101,6mm (4 in.)/ Length 900mm
    Winding tension max 750 N (rated load 1.000 N)


The advanTex 850 consists of following main components (in process order):
  1. Unwinding creel with bobbin adaptors
  2. Power-driven draw-in rollers with avivage application
  3. Tape guide elements
  4. Compensation with warp break detecting system
  5. Operating elements
  6. Shed formation and main drive
  7. Reed ring
  8. Weaving shuttle with weft break detecting system
  9. Weaving ring
  10. Temple
  11. Cloth haul off
  12. Cloth winder
  13. Electric control cabinet
  14. Processor control intelliCon A
Production data for fabric weights of 50-180 g/m2 and PP tapes of 500-2.000 den (25-100 μ), non-splitting.
Other production data possible (to be tested upon request) – All drawings and data are non-binding and subject to modifications without prior notice