flexaTex 850

roll-to-roll printing machine

The flexaTex 850 is specially designed to print PP fabric, circular woven or flat, coated or uncoated.

In one single process step up to 6 colours on both sides can be applied.

Advanced features like fully automatic unwinding and winding ensure highest possible efficiency at a minimum amount of waste.

Proven European workmanship allows for high production speed at maximum reliability.

Technical data:


  • Materials: Flat or tubular PP/PE woven fabric (coated or uncoated), paper, PE film
  • Web width: max. 850 mm
  • Printing width: max. 820 mm
  • Print repeat range: 450 - 1.250 mm
  • Print variations: 6:0, 5:1, 4:2, 3:3
  • Fabric weight: Tubular fabric max. 100 g/m2 (2x), flat fabric max. 180 g/m2
  • Production speed: max. 200 m/min (depending on fabric specification)

The flexaTex 850 consists of following main components:

  1. Electrical equipment
  2. Unwinding unit
  3. Corona treater
  4. Print unit frame
  5. Color deck
  6. Impression cylinder
  7. Register adjustment
  8. Set of anilox rolls
  9. Ink circulation system
  10. Print unit drive
  11. Idler rollers
  12. Overhead bridgework
  13. Drying system
  14. Automatic centralized lubrication
  15. Plate cylinder and drive gear
  16. filmaTex 850 contact winder

filmaTex web.jpg

filmaTex 850 contact winder

  • Working width eff.: max. 850 mm
  • Winding diameter: max. 1.500 mm
  • Pre-winding diameter: 400 mm
  • Core inner diameter: min. 4", max. 8" (pneumatic winding shaft)
  • Winding offset: max. +/- 35 mm (rail system, motor driven undercarriage)
  • Winding tension: max. 1.500 N; controlled by load cell system
  • Winding pressure: 3.000 N, pneumatically actuated
  • Winding speed: max. 200 m/min
  • Roll change speed: max. 100 m/min
  • Fabric cutting: Pneumatic cross-cutting system (industrial blade - flying knife)


Other production data possible (to be tested upon request) – Pictures, drawings and data are non-binding and subject to modifications without prior notice.