pressTex

hydraulic baling press

The hydraulic baling press pressTex is specially designed for the baling of bags or raffia bags.

It is of very rigid design, suitable for baling stacks with a very large number of bags. The stacks can be loaded directly onto pallets. A loading ramp is also provided, to allow the use of pallet lifting carts.

Technical data:


  • Stamp size: 1.650 x 1.250 mm
  • Stroke: 1.500 mm
  • Clearance height: 1.800 mm
  • Maximum stack height (before compression): 1.600 mm
  • Minimum stack height (after compression): 300 mm (depending on number of bags)
  • Max. pressing force: 245 kN (25 t)
  • Cylinder stroke: 1.500 mm
  • Stroke speed (approx.): down 40 mm/sec, up 80 mm/sec
  • Operating hydraulic pressure: max. 180 bar

The pressTex consists of following main components:

  1. Frame with guiding system for the stamp
  2. Stamp with recessed pressure plate
  3. Hydraulic unit
  4. Hydraulic cylinder
  5. Electrical controls
  6. Loading ramp

Machine dimensions:
width 2.200 mm
height 4.300 mm
depth without loading ramp: 1.400 mm
depth with loading ramp: 3.300 mm

Other production data possible (to be tested upon request) – Pictures, drawings and data are non-binding and subject to modifications without prior notice.